 | Nissan Kubistar Van Roof Bars
Nissan Kubistar Van Heavy Duty Steel Roof Bars X 2
These roof bars are made from 50mmx30mmx1.5mm Stainless Steel for many years of corrosion resistance.
The other parts are made from 3mm thick pre galvanized steel then powdercoated black , and will also last for many years.
All fixings and fitting instructions are supplied.
Drilling of the roof will be required when fitting this product.
Approximate fitting time 30 mins.
Maximum load 45 kgs per bar.
Ref: PLY131
Price: £72.00 (Excluding: VAT at 17.5%)
|
|
|
 | Nissan Kubistar Van Full Steel Roller Kit
Nissan Kubistar Van Full Steel Roller Kit
To be used in conjunction with roof bars - purchased separately
This stainless steel full width roller is mounted on pre galvaized steel channels attached to the rear and middle roof brackets to provide maximum ridgidity.The channels are slotted to provide some adjustment of the roller position.The roller is running in nylon bearings for a smooth rotation.
They will come with the correct roller length for your roof bars, If ordered at the same time.
All fittings are included.
Fitting time approximatly 20 mins.
Ref: PLY131R
Price: £46.00 (Excluding: VAT at 17.5%)
|
|
|
 | Nissan Kubistar Van Roof Rack
Nissan Kubistar Van Heavy Duty Stainless Steel 8 X 4 Capacity Roof Rack Includes full width Stainless Steel Roller
All the cross and side bars are made from 50mmx30mm x1.5mm Stainless Steel for life long corrosion resistance, all other parts are made from pre galvanized steel and then polyester powdercoated.
The roller on the rear bar is full width and runs in nylon bearings for a smooth rotation.
Full fitting instructions & Fixings are supplied.
Fitting time approx 45 mins.
Maximum load 125 kgs
Ref: PLY131/147
Price: £181.00 (Excluding: VAT at 17.5%)
|
|
|
 | SWB Nissan Primastar Van Roof Bars x 2
SWB Nissan Primastar Van Roof Bars x 2 - Flat Roof
This 2 bar roof rack is made from pre galvanized steel and powdercoated for many years of protection. The cross members are made from 50mmx30mmx1.5mm Stainless Steel also providing many years of corrosion resistance.
All other parts are made from 3mm thick pre galvanized steel then powdercoated black .
All fixings and fitting instructions are supplied.
Approximate fitting time 45 mins.
Maximum load 45 kgs per bar.
Ref: PLY255/2
Price: £75.00 (Excluding: VAT at 17.5%)
|
|
|
 | MAXUS 2 Bar Primastar Roof Bar System
MAXUS 2 bar Vivaro / Traffic / Primastar.
MAXUS complete 2 bar system Code B19.
MAXUS 2 bar complete system, for Vivaro / Traffic / Primastar. 165cm bars 40mm x 40mm section. Laser cut steel brackets, finished in bright zinc passivated finish. The image shows the system with load stops which are not included within the price. The system is complete with all mountings and fixing to mount on van.
Ref: PLYB19MAXUS
Price: £69.00 (Excluding: VAT at 17.5%)
|
|
|
 | RHINO 2 Bar Primastar Roof Bar System
RHINO Traffic/Vivaro/Primastar 2 bar.
RHINO 2 bar system.
Rhino 2 bar system 165cm zinc plated bars , and vehicle mounting brackets, includes all fixings. The image shows the system with load stops which are not included within the price.
Ref: PLYRHINO2BAR
Price: £79.00 (Excluding: VAT at 17.5%)
|
|
|
 | MAXUS Rear 3 Bar Primastar Roof Bar System
MAXUS 3 bar Rear for Vivaro/Trafic/Primastar.
MAXUS complete 3 Bar system using the rear 3 roof mounting points - Code B9.
MAXUS 3 bar complete system, for Vivaro / Traffic / Primastar. 165cm bars 40mm x 40mm section. Laser cut steel brackets, finished in bright zinc passivated finish. This system uses the 3 rear roof mounting positions and is complete with all brackets and fixing to mount on van.
Ref: PLYB9MAXUS
Price: £97.00 (Excluding: VAT at 17.5%)
|
|
|
 | SWB Nissan Primastar Van 3 Bar Roof Rack
SWB Nissan Primastar Van Heavy Duty Steel 3 Bar Roof Rack - Flat Roof
This 3 bar roof rack comes complete with front wind deflector and side rails made from pre galvanized steel and powdercoated for many years of protection. The cross members are made from 50mmx30mmx1.5mm Stainless Steel also providing many years of corrosion resistance.
All other parts are made from 3mm thick pre galvanized steel then powdercoated black .
All fixings and fitting instructions are supplied.
Approximate fitting time 45 mins.
Maximum load 45 kgs per bar.
Ref: PLY182/SWB
Price: £145.00 (Excluding: VAT at 17.5%)
|
|
|
 | SWB Nissan Primastar Van 4 Bar Roof Rack
SWB Nissan Primastar Van 4 Bar Roof Rack - Flat Roof
This 4 bar roof rack comes complete with front wind deflector and side rails made from pre galvanized steel and powdercoated for many years of protection. The cross members are made from 50mmx30mmx1.5mm Stainless Steel also providing many years of corrosion resistance.
All other parts are made from 3mm thick pre galvanized steel then powdercoated black .
All fixings and fitting instructions are supplied.
Approximate fitting time 45 mins.
Maximum load 45 kgs per bar.
Ref: PLY182/SWB/4
Price: £180.00 (Excluding: VAT at 17.5%)
|
|
|
| | LWB Nissan Primastar Van 4 Bar Roof Rack
LWB Nissan Primastar Van 4 Bar Roof Rack - Flat Roof
This 4 bar roof rack comes complete with front wind deflector and side rails made from pre galvanized steel and powdercoated for many years of protection. The cross members are made from 50mmx30mmx1.5mm Stainless Steel also providing many years of corrosion resistance.
All other parts are made from 3mm thick pre galvanized steel then powdercoated black .
All fixings and fitting instructions are supplied.
Approximate fitting time 45 mins.
Maximum load 45 kgs per bar.
Ref: PLY182/LWB
Price: £180.00 (Excluding: VAT at 17.5%)
|
|
|
 | Nissan Primastar Van Full Steel Roller Kit
Nissan Primastar Van Full Steel Roller Kit
To be used in conjunction with roof bars - purchased separately
This stainless steel full width roller is mounted on pre galvaized steel channels attached to the rear and middle roof brackets to provide maximum ridgidity.The channels are slotted to provide some adjustment of the roller position.The roller is running in nylon bearings for a smooth rotation.
They will come with the correct roller length for your roof bars, If ordered at the same time.
All fittings are included.
Fitting time approximatly 20 mins.
Ref: PLY182R
Price: £46.00 (Excluding: VAT at 17.5%)
|
|
|
 | Primastar Official Genuine Factory Roof Bars
Trafic Vivaro Primastar Official Genuine Factory Roof Bars.
The Bars are the official brand of roof bar supplied by Renault, Vauxhall and Nissan to dealerships.
The system is complete with all mountings and fixing to mount on van.
The bars can fit either the swb of lwb vans. The swb van can take upto Four(4) bars.
The price quoted is per bar.
Ref: PLYFACTORYBARS
Price: £47.00 (Excluding: VAT at 17.5%)
|
|
|
 | Nissan Primastar Galvanized Roof Rack
Vauxhall Vivaro, Renault Trafic and Nissan Primastar MAXUS full galvanized platform roofrack with side rails.
This product is suitable for the Short Wheel Base - SWB - Low Roof - Van only.
MAXUS fully welded Vivaro / Trafic / Primastar van roofracks are constructed using 40mm x 20mm box section steel and hot dipped galvanised for a corrosion resistant finish.
MAXUS van roof racks come complete with 125mm side rails, 550mm rear roller and front aerofoil to help increase fuel economy. This roofrack system is capable of carrying 8x4 sheet material. All mounting brackets are laser cut and all nuts and bolts are included.
This rack fits to the factory mounting points no need to drill the van roof.
Ref: PLYR31MAXUS
Price: £248.00 (Excluding: VAT at 17.5%)
|
|
|
 | Nissan Interstar Van Roof Bars X 3
Nissan Interstar Van Heavy Duty Steel Roof Bars X 3.
Ref: PLY134/3
Price: £146.00 (Excluding: VAT at 17.5%)
|
|
|
| | Nissan Interstar Van Roof Bars X 4
Nissan Interstar Van Heavy Duty Steel Roof Bars X 4.
Ref: PLY134/4
Price: £175.00 (Excluding: VAT at 17.5%)
|
|
|
| | Nissan Interstar Van Full Steel Roller Kit
Nissan Interstar Van Full Steel Roller Kit
To be used in conjunction with roof bars - purchased separately
This stainless steel full width roller is mounted on pre galvaized steel channels attached to the rear and middle roof brackets to provide maximum ridgidity.The channels are slotted to provide some adjustment of the roller position.The roller is running in nylon bearings for a smooth rotation.
They will come with the correct roller length for your roof bars, If ordered at the same time.
All fittings are included.
Fitting time approximatly 20 mins.
Ref: PLY134R
Price: £46.00 (Excluding: VAT at 17.5%)
|
|
