 | Citroen Berlingo Van Roof Bars
Citroen Berlingo Van Heavy Duty Steel Roof Bars X 2
These roof bars are made from 50mmx30mmx1.5mm Stainless Steel for many years of corrosion resistance.
They are extra wide for carrying 4'wide sheets.
They also have 4 adjustable ladder stops
The other parts are made from 3mm thick pre galvanized steel then powdercoated black , and will also last for many years.
All fixings and fitting instructions are supplied.
No drilling of the roof will be required when fitting this product.
Approximate fitting time 30 mins.
Maximum load 45 kgs per bar.
Ref: PLY96
Price: £72.00 (Excluding: VAT at 17.5%)
|
|
|
 | MAXUS Berlingo Complete 2 bar Roof Bar System
MAXUS Berlingo Partner Complete 2 bar system.
Complete 2 bar system -Code B3.
MAXUS 2 bar complete system for Berlingo / Partner vans 135cm bars 40mm x 40mm section. Laser cut steel brackets, finished in bright zinc passivated finish. The system is complete with all mountings and fixing to mount on van, designed to fit onto the factory mounting points.
Ref: PLYB3MAXUS
Price: £66.00 (Excluding: VAT at 17.5%)
|
|
|
 | Rhino Berlingo 2 bar Roof Bar System
Rhino Berlingo Partner 2 bar system.
Complete 2 bar system - Code RH-G2-1262
126cm bars 40mm x 30mm bars finished in bright zinc passivated finish with welded end loops and vehicle mounting kit. This system fits to the factory roof mounting points.
Ref: PLYRH-G2-1262
Price: £74.00 (Excluding: VAT at 17.5%)
|
|
|
 | Citroen Berlingo Van Full Steel Roller Kit
Citroen Berlingo Van Full Steel Roller Kit
To be used in conjunction with roof bars - purchased separately
This stainless steel full width roller is mounted on pre galvaized steel channels attached to the rear and middle roof brackets to provide maximum ridgidity.The channels are slotted to provide some adjustment of the roller position.The roller is running in nylon bearings for a smooth rotation.
They will come with the correct roller length for your roof bars, If ordered at the same time.
All fittings are included.
Fitting time approximatly 20 mins.
Ref: PLY96R
Price: £47.00 (Excluding: VAT at 17.5%)
|
|
|
 | Citroen Berlingo Van Roof Rack
Citroen Berlingo Van Heavy Duty Stainless Steel 8 X 4 Capacity Roof Rack Includes full width Stainless Steel Roller
All the cross and side bars are made from 50mmx30mm x1.5mm Stainless Steel for life long corrosion resistance, all other parts are made from pre galvanized steel and then polyester powdercoated.
The roller on the rear bar is full width and runs in nylon bearings for a smooth rotation.
Full fitting instructions & Fixings are supplied.
No drilling of the roof will be required when fitting this product.
Fitting time approx 45 mins.
Maximum load 125 kgs
Ref: PLY147/96
Price: £181.00 (Excluding: VAT at 17.5%)
|
|
|
 | Citroen Berlingo Galvanized Roof Rack
Citroen Berlingo MAXUS full galvanized platform roofrack with side rails.
MAXUS fully welded Berlingo / Partner van roofracks are constructed using 40mm x 20mm box section steel and hot dipped galvanised for a corrosion resistant finish.
MAXUS van roof racks come complete with 125mm side rails, 550mm rear roller and front aerofoil to help increase fuel economy. This roofrack system is capable of carrying 8x4 sheet material. All mounting brackets are laser cut and all nuts and bolts are included.
This rack fits to the factory mounting points no need to drill the van roof.
Ref: PLYR30MAXUS
Price: £222.00 (Excluding: VAT at 17.5%)
|
|
|
 | Citroen Dispatch Van Roof Bars - Pre Feb 2007
Citroen Dispatch Van Heavy Duty Steel Roof Bars X 3 - Pre Feb 2007
These roof bars are made from 50mmx30mmx1.5mm Stainless Steel for many years of corrosion resistance.
The other parts are made from 3mm thick pre galvanized steel then powdercoated black , and will also last for many years.
All fixings and fitting instructions are supplied.
Approximate fitting time 30 mins.
Maximum load 45 kgs per bar.
Ref: PLY96
Price: £119.00 (Excluding: VAT at 17.5%)
|
|
|
 | Citroen Dispatch Van Full Steel Roller Kit - Pre Feb 2007
Citroen Dispatch Van Full Steel Roller Kit - Pre Feb 2007
To be used in conjunction with roof bars - purchased separately
This stainless steel full width roller is mounted on pre galvaized steel channels attached to the rear and middle roof brackets to provide maximum ridgidity.The channels are slotted to provide some adjustment of the roller position.The roller is running in nylon bearings for a smooth rotation.
They will come with the correct roller length for your roof bars, If ordered at the same time.
All fittings are included.
Fitting time approximatly 20 mins.
Ref: PLY96R
Price: £47.00 (Excluding: VAT at 17.5%)
|
|
|
 | Citroen Dispatch Van Roof Rack - Pre Feb 2007
Citroen Dispatch Van Heavy Duty Stainless Steel 8 X 4 Capacity Roof Rack Includes full width Stainless Steel Roller - Pre Feb 2007
All the cross and side bars are made from 50mmx30mm x1.5mm Stainless Steel for life long corrosion resistance, all other parts are made from pre galvanized steel and then polyester powdercoated.
The roller on the rear bar is full width and runs in nylon bearings for a smooth rotation.
Full fitting instructions & Fixings are supplied.
Fitting time approx 45 mins.
Maximum load 125 kgs
Ref: PLY147/86
Price: £181.00 (Excluding: VAT at 17.5%)
|
|
|
 | Citroen Dispatch SWB L1 Van Heavy Duty 3 Bar Roof Rack - Feb 2007 On
Citroen Dispatch SWB L1 Van Heavy Duty 3 Bar Roof Rack - Feb 2007 On
These roof bars are made from 50mmx30mmx1.5mm Stainless Steel for many years of corrosion resistance.
The other parts are made from 3mm thick pre galvanized steel then powdercoated black , and will also last for many years.
All fixings and fitting instructions are supplied.
Approximate fitting time 30 mins.
Maximum load 45 kgs per bar.
Ref: PLY248/3/SWB
Price: £119.00 (Excluding: VAT at 17.5%)
|
|
|
| | Citroen Dispatch LWB L2 Van Heavy Duty 3 Bar Roof Rack - Feb 2007 On
Citroen Dispatch LWB L2 Van Heavy Duty 3 Bar Roof Rack - Feb 2007 On
These roof bars are made from 50mmx30mmx1.5mm Stainless Steel for many years of corrosion resistance.
The other parts are made from 3mm thick pre galvanized steel then powdercoated black , and will also last for many years.
All fixings and fitting instructions are supplied.
Approximate fitting time 30 mins.
Maximum load 45 kgs per bar.
Ref: PLY248/3/LWB
Price: £119.00 (Excluding: VAT at 17.5%)
|
|
|
 | Citroen Dispatch Van Full Steel Roller Kit - Feb 2007 On
Citroen Dispatch Van Full Steel Roller Kit - Feb 2007 On
To be used in conjunction with roof bars - purchased separately
This stainless steel full width roller is mounted on pre galvaized steel channels attached to the rear and middle roof brackets to provide maximum ridgidity.The channels are slotted to provide some adjustment of the roller position.The roller is running in nylon bearings for a smooth rotation.
They will come with the correct roller length for your roof bars, If ordered at the same time.
All fittings are included.
Fitting time approximatly 20 mins.
Ref: PLY248/3/R
Price: £47.00 (Excluding: VAT at 17.5%)
|
|
|
 | Citroen Dispatch Galvanized Roof Rack
Citroen Dispatch, Peugeot Expert and Fiat Scudo MAXUS full galvanized platform roofrack with side rails.
This product is suitable for the Short Wheel Base - SWB - Low Roof - L1H1 Van only.
MAXUS fully welded Dispatch / Expert / Scudo van roofracks are constructed using 40mm x 20mm box section steel and hot dipped galvanised for a corrosion resistant finish.
MAXUS van roof racks come complete with 125mm side rails, 550mm rear roller and front aerofoil to help increase fuel economy. This roofrack system is capable of carrying 8x4 sheet material. All mounting brackets are laser cut and all nuts and bolts are included.
This rack fits to the factory mounting points no need to drill the van roof.
Ref: PLYR35MAXUS
Price: £230.00 (Excluding: VAT at 17.5%)
|
|
|
 | MAXUS 2 Bar Dispatch Roof Bars
MAXUS 2 Bar Scudo/Dispatch/Expert.
MAXUS complete 2 bar system - Code B13.
MAXUS heavy duty 2 bar system for the New Scudo/Dispatch/Expert vans. 40mm x 40mm zinc plated 150cm bars complete with laser cut brackets and vehicle mounting kit. The Maxus system is a very rigid strong system because each mounting bracket is secured to the roof via two mounting locations , not one like most other manufacturers.
Suitable for the Swb Low Roof Van(L1H1)Only.
Ref: PLYB13MAXUS
Price: £75.00 (Excluding: VAT at 17.5%)
|
|
|
 | Citroen Relay Van Roof Bars
Citroen Relay Van Heavy Duty Steel Roof Bars X 3.
These roof bars are made from 50mmx30mmx1.5mm Stainless Steel for many years of corrosion resistance.
The other parts are made from 3mm thick pre galvanized steel then powdercoated black , and will also last for many years.
All fixings and fitting instructions are supplied.
Approximate fitting time 30 mins.
Maximum load 45 kgs per bar.
Ref: PLY100
Price: £119.00 (Excluding: VAT at 17.5%)
|
Year
|
